Beat Buddy Audio Visualizer
Enhance Your Music Experience with the Sakura86Style's Beat Buddy Audio Visualizer!
This device transforms your audio into a stunning light show, syncing perfectly with the rhythm and beats of your music. Perfect for cars, home audio systems, or even as a unique decorative piece on your desk!
Key Features:
- Real time music visualization: The LED lights react to the sound frequencies, creating a mesmerizing spectrum display that moves in sync with your music.
- 10 Adjustable Sensitivity Levels: Customize the responsiveness of the lights to match the volume and intensity of your audio.
- Vibrant LED Lights: Enjoy a dynamic light show with bright, energy-efficient LEDs that enhance any environment.
- Compact & Easy to Install: Designed for versatility, this device can be used in cars, home audio setups, or as a standalone decorative piece.
-
Built-in Microphone: The integrated microphone picks up sound effortlessly, ensuring accurate and responsive light synchronization.
Whether you're cruising in your car or simply enjoying your favorite tunes at home, the Sakura86Style Beat Buddy adds a fun and immersive element to your music experience.
How to operate:
1. Single Click
UP - Mode Change
OK - Fixed display frequency indication/only display frequency indication when there is a signal.
DOWN - Mode Change
2. Double Click
UP - Normal mode/Upside Down mode
OK - Real output / Smooth output
DOWN - Norma mode/Inverted color mode
3. Three Clicks
UP - Noise filtering function
(Note: There is a different noise in ambient. The principle of this function is to filter the background noise in the ambient, and then the sound larger than the ambient noise will be recognized. Before doing this noise calibration, make sure that the ambient sound is quiet and stable. It is recommended to do a calibration if the use occasion Changes.)(In 3.5"audio wired input mode, please ensure that no music is played when performing this function to ensure that the noise is eliminated)
OK - Switch 3.5" audio wired input and sound-controlled (default setting is sound-controlled)
DOWN - The one-click noise filtering function is turned off.
4. Four Clicks
OK - Enter the gain selection setting AGC/-20dB/-15dB/-10dB/-5dB/OdB (After entering mode, switch through the UP/DOWN key, default setting is AGC)
DOWN - Enter the amplification curve settings (5 modes After entering the mode setting, switch through the UP/DOWN.
5. Five Clicks
OK - Enter the following 3 modes (after entering the mode, switch through the UP/DOWN key)
1. Automatic mode(AUTO)(display spectrum when receiving audio signal, Entering standby mode in 30 seconds when there is no signal) (default setting)
2.Auto off mode(AUTO OF)(display spectrum when receiving audio signal, auto off in 30 seconds when there is no audio signal.
3.Music mode(AUDIO)(spectrum status is always displayed)
6. Six Clicks
OK - Enter setting mode of speed
7. Seven Clicks
UP+Down+OK -2 Seconds, Enter the screen self-test program, press the OK button 2 seconds to exit.
8. Eights Clicks
UP - Brightness increase(Brightness can be adjusted 8 levels, Default is the level 5)
OK - 1 second to enter standby mode. 3 seconds switch it off. In standby or shutdown mode it waked up by pressing the OK button. (Pressing the UP/DOWN key is invalid),powering on again after power failure it will automatically release the standby/shutdown status.
DOWN - Brightness reduction
Speed Setting Mode: (In normal mode, click the OK button 6 times to enter, Press and hold the OK button for 2 seconds or do not operate
for 5 seconds to exit)
UP - Time increases, Speed decreases
OK - 1.The falling speed of the light bar (15 optional)
2. The holding time of the peak (15 optional).
3. The falling speed of the peak (15 optional)
4. Output selection (Real output / smooth output)
Loop in these functions
DOWN - Time decreases, Speed increase\
Factory Reset/Default Settings
UP+Down for 10 seconds.
What's Included?
1x Sakura86Style Beat Buddy Audio Visualizer Screen
1x Type-C to USB cable
1x Aux Cable
1x Aux Audio Splitter